||General Engineer, GS-801|
Basic Requirements for all grades, GS-5 and above
Degree: professional engineering. To be acceptable, the curriculum must:
- be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or
- include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
Click here for information on alternate methods of qualifying without a professional degree in engineering.
Additional Experience and Education Requirements For GS-7 and Above
In addition to meeting the basic entry qualification requirements, applicants must have specialized experience and/or directly related education in the amounts shown in the table below:
Graduate Education: Completion of graduate level education in an accredited college or university in the amounts shown in the table, in addition to meeting the basic requirements, is qualifying for positions at grades GS-7 through GS-11 if it provided the knowledge, skills, and abilities necessary to do the work. One year of full-time graduate education is considered to be the number of credit hours that the school attended has determined to represent 1 year of full-time study. If that number cannot be obtained from the school, 18 semester hours should be considered an academic year of graduate study. Part-time graduate education is creditable in accordance with its relationship to a year of full-time study at the school attended.
Specialized Experience: Experience that equipped the applicant with the particular knowledge, skills, and abilities to perform successfully the duties of the position, and that is typically in or related to the work of the position to be filled. To be creditable, specialized experience must have been equivalent to at least the next lower grade level in the normal line of progression for the occupation in the organization.
Following are examples of Specialized Experience. General Engineers vary so much, however, that you need to consult the actual vacancy announcement for information specific to the position. Some examples of Specialized Experience may include:
To qualify for GS-7: making calculations applying standard formulas; preparing graphs, curves, and tables for other engineers; recording factual data in tests and observation studies; performing drafting and minor detail design; and/or searching technical reports to obtain information.
To qualify for GS-9: adapting practices and techniques to specific situations; adjusting and correlating data; recognizing discrepancies and deviations in results; following operations through a series of related detailed steps or processes; making tentative and preliminary selections; adapting engineering alternatives and/or after approval by the supervisor, carrying out a sequence of details.
To qualify for GS-11: performing assignments in which complex features occur infrequently or in isolated, single units; making minor deviations to previous work, such as sizes, dimensions, and relationships of details, which can be resolved by engineering calculations; investigating a limited number of variables; carrying out experiments in accordance with approaches which have been structured by others; planning project details on the basis of precedents established in related projects; recommending methods of standardized analysis as a basis for solving problems; and/or making only minor adaptations or modifications to well-established methods and techniques.
To qualify for GS-12: performing assignments that involve combinations of complex features; planning and conducting work for which precedent data, criteria, methods, or techniques are inadequate in some respects, or contain narrow gaps; and/or completing work where the purpose is to improve, extend, or validate currently known precedents, data, methods, or techniques.
To qualify for GS-13: performing work characterized by many, varied complex features due to the breadth, diversity, or intensity of assignments; adapting, modifying or making compromises with standard guides, precedents, methods and techniques; planning and conducting work for which precedent data, criteria, methods, or techniques are significantly inadequate, are controversial or contain critical gaps; developing new features, in addition to improving, extending, or validating currently known precedents, data, methods, or techniques; and/or performing staff advisory, consulting, and reviewing services for an engineering organization.
To qualify for GS-14: serving as technical experts on the limitations of proven concepts and practices of a broad and complex subject-matter field or functional area; taking short-cuts or making compromises that are considered risky or extreme within the context of standard guides, precedents, methods and techniques; completing assignments that require the ability to anticipate and to take positive action on problems which, if not identified in their early stages, would likely lead to serious consequences, e.g., problems involving public safety, key relationships, resource limitations, or performance reliability; performing certain kinds of staff advisory, consulting, and reviewing services.
To qualify for GS-15: conceiving, planning, and conducting work in unexplored areas where there is little or no theory to guide experimentation, progress is devious, new techniques and approaches need to be devised, and future lines of fruitful experimentation are difficult to determine; earning recognition as an authority in their fields, by breaking through the frontier areas and coming up with new knowledge of fundamental significance which will influence the procedures and ideas of others; developing and designing new theoretical treatments, instrumentation, equipment, and procedures for testing and solving the problems; representing the organization on technical committees developing general plans and procedures for carrying out research and experimental projects; developing short- and long-range research and development plans and programs for a large group of research, development, and test activities; developing and correlating research objectives; originating new concepts, methods, and techniques for research planning, program guidance, program evaluation, technological forecasting, and resource allocation; conducting special planning studies to discover, create, and synthesize new approaches to the problems of establishing adequate research and development programs; and/or coordinating technical planning in installation activities by relating future program plans to projected requirements, available resources, installation responsibilities, interrelated effort of various laboratories, and scientific discoveries.
Additional Experience and Training Provisions for Graduates of Professional Engineering Curricula:
- Superior academic achievement at the baccalaureate level in a professional engineering curriculum is qualifying for GS-7.
- Individuals can be converted noncompetitively to a GS-7 position if they complete all the requirements of a Federal baccalaureate level student-trainee program, including 1040 hours of work experience, 320 hours of which was at the GS-5 level.
- A combination of superior academic achievement and 1 year of appropriate professional experience is qualifying at GS-9.
- Applicants with an engineering degree who have appropriate experience as a technician equivalent to grade GS-5 or higher may have such experience credited for grade GS-7 only on a month-for-month basis up to a maximum of 12 months.
- Successful completion of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering is qualifying at GS-7. Completion of such a program and 1 year of appropriate professional experience is qualifying at grade GS-9.
Definition of Professional Engineering Experience: The professional engineering experience required for grades GS-7 and above is defined as non-routine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability.
Professional knowledge of engineering is defined as the comprehensive, in-depth knowledge of mathematical, physical, and engineering sciences applicable to a specialty field of engineering that characterizes a full 4-year professional engineering curriculum leading to a bachelor's degree, or the equivalent.
Professional ability to apply engineering knowledge is defined as the ability to (a) apply fundamental and diversified professional engineering concepts, theories, and practices to achieve engineering objectives with versatility, judgment, and perception; (b) adapt and apply methods and techniques of related scientific disciplines; and (c) organize, analyze, interpret, and evaluate scientific data in the solution of engineering problems.
Professional work in engineering, like that in other professions, is marked by continuing personal effort to keep abreast of the advancing and changing discipline. Continuing education in engineering and related fields is an important element of full professional competence as an engineer that should be considered in evaluating the qualifications of applicants for professional engineering positions.
In some situations, experience may be creditable even if it is not clearly professional engineering work. In such cases, the experience must have been preceded by prior responsible professional engineering experience and must contribute directly and significantly to the applicant's engineering competence. For example, an engineer might be assigned to a management-type position in preparation for assumption of higher-level responsibilities in engineering project or program management.
Individuals can be converted noncompetitively to a GS-9 position if they complete all the requirements of a Federal graduate-level student-trainee program, including completion of a master's degree in engineering and completion of 640 hours of work experience, 320 hours of which was at GS-7.
Regardless of the field of undergraduate study, completion of the requirements for a master's or higher degree in engineering is fully qualifying for the grade indicated, provided the applicant's total background, i.e., education and any experience, demonstrates evidence of knowledge, skills, and abilities that are substantially equivalent to those acquired through the successful completion of the courses specified in paragraph (1).
With a bachelor's degree in engineering, graduate education in a related field is acceptable in lieu of graduate study in engineering for appropriate types of positions. For example, a BS in engineering plus a master's degree in business administration would be qualifying for Industrial Engineer, GS-9, but not for GS-9 laboratory positions in research and development. The key consideration in determining if such graduate education should be credited is whether or not the education provided the knowledge, skills, and abilities necessary to perform the work of the position being filled.
College-level teaching of engineering may be considered as professional experience in engineering. In accepting and evaluating teaching experience, all specific qualification requirements pertaining to the evaluation of professional experience such as grade level, responsibility, scope, specialization, and knowledge required are also applicable to the evaluation of teaching experience. Teaching experience that is accompanied by a significant amount of research, direction of research, investigative, or similar work may be credited at full value in meeting a specific requirement for research, investigative, or similar experience.
(Back to the top)